Line types: Properties report

The line type properties report is available from the popup menu on the data form.

Individual page

The individual page reports the following derived values for a selected line type:

Diameter profile, profile length (only reported for profiled line types)

The name of the variable data item that defines the profile, and its length.

Weight

The force due to gravity acting on the line type's mass.

Buoyancy

The weight of water displaced by the line type's volume, based on a nominal water density.

Submerged weight

Weight $-$ buoyancy.

Mass

The line type's mass.

Displaced mass

The mass of water displaced by the line type's volume, based on a nominal water density.

Submerged mass

Mass $-$ displaced mass.

Diameter to submerged weight ratio

Outer diameter / submerged weight.

Diameter to submerged mass ratio

Outer diameter / submerged mass.

Note: For line types with non-zero bore, you must specify the contents density to be used in the calculation of the above properties, since this will affect the properties which involve weight.

Used in, contents density

The names and contents densities of each line that uses that line type.

All page

The all page contains a spreadsheet with two worksheets: