Code checks: Properties report

The code checks properties report is available from the popup menu on the data form. It reports various internal quantities that are used in the code check calculations, but are neither data items nor available as results. The values reported vary for each code check, as follows:

• API RP 2RD: Nothing reported.
• API STD 2RD: $p_\mathrm{c}, p_\mathrm{b}, T_\mathrm{y}, M_\mathrm{p}, M_\mathrm{y}$.
• API RP 1111: $p_\mathrm{c}, p_\mathrm{b}, T_\mathrm{y}, \epsilon_\mathrm{b}, g$.
• DNV ST F101: $p_\mathrm{c}, p_\mathrm{b}, M_\mathrm{p}, S_\mathrm{p}$.
• DNV OS F201: $p_\mathrm{c}, p_\mathrm{b}, M_\mathrm{k}, T_\mathrm{k}$.
• PD 8010: $p_\mathrm{c}, F_\mathrm{xc}, M_\mathrm{p}, M_\mathrm{c}, \tau_\mathrm{c}, \epsilon_\mathrm{bc}$.

In the main, these quantities can all be derived directly from input data. Therefore the values are available in reset state, and are not dependent on values calculated by an OrcaFlex analysis. The exception are $M_\mathrm{k}, T_\mathrm{k}$ for DNV OS F201. These values also depend on a value that the code terms $\alpha_\mathrm{c}$ that is normally calculated from the output of an OrcaFlex analysis. For the purpose of the properties report, you can enter a value for $\alpha_\mathrm{c}$ and the values are reported based on that user supplied value.